Color: Blue Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430
series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight
VCC: 3.3-5V GND: Ground
SCL: Serial Clock
SDA: Serial Data
1 X 0.96inch IIC OLED Moudle Blue
PS:When you can’t light up the oled display, pls check the following issues:
1,Check the connection between OLED and Arduino;
2,Make sure you are using out provided libraries;
3,The default I2C/IIC address of the display should be 0x3C. We printed in model is 0x78 or 0x7A, but for AVR or MSP430 series (Arduino based on AVR), the IIC/I2C buffer is 7-bits, so, we should right shift 1-bit while using in Arduino or MSP430.
4,Check the VCC and GND pins is right be connected, never connect VCC to GND and GND to VCC, it will broke model less than a second.
5,Wipe the tin Solder part with alcohol.
The screen is made in Taiwan, quality is much better. If you have any problems when using this oled, pls contact us, we are glad to help you solve the issue you met.
Compatible with MMDVM，Pi-Star, and it works with raspberry pi. https://tech.scargill.net/ssd1306-with-python/
Four square holes are easy to install. The IIC address can be changed,it is convenient to use with different machines
What you will get is : 1 X 0.96inch oled module blue.