KNACRO 3.2~5.5V 433Mhz HC-12 SI4463 wireless microcontroller serial module Long-distance transmission 1000M Alternative

Supply voltage 3.2V ~ 5.5V. (If the module you want to work at transmission time, it is recommended when the supply voltage exceeds 4.5V series with a 1N4007 diode to

Category: .

Supply voltage 3.2V ~ 5.5V. (If the module you want to work at transmission time, it is recommended when the supply voltage exceeds 4.5V series with a 1N4007 diode to avoid heating module built LDO).
The default communication distance (open field test): about 600m (the maximum communication distance adjustable reached 1000m, the air baud rate 5000bps).
The default idle current: 16MA (modules in different operating modes of different operating current).
Operating frequency range (433.4-473.0MHz, up to 100 communication channels) Maximum 100mW transmit power (can be set).
The default factory settings: Operating mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).
Supply voltage: 3.2V ~ 5.5V.
The default communication distance (open field test): about 600m (the maximum communication distance adjustable reached 1000m, the air baud rate 5000bps).
The default idle current: 16mA.
Operating frequency range: 433.4-473.0MHz, up to 100 communication channels.
Transmit power (can be set): Max 100mW.
The default factory settings: Operating mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).
Module size: 27.4 * 14.4 * 4mm (L * W * H).
Weight: 1.8g.
Pin Description:
VCC: 3.2V ~ 5V.
GND: Ground.
RXD: TTL level input.
TXD: TTL-level output.
SET: Parameter settings control pin, active low.
ANT1: PCB Antenna.
ANT2: Antenna welding holes.
Supply voltage 3.2V ~ 5.5V. (If the module you want to work at transmission time, it is recommended when the supply voltage exceeds 4.5V series with a 1N4007 diode to avoid heating module built LDO).
with a 1N4007 diode to avoid heating module built LDO).
The default communication distance (open field test): about 600m (the maximum communication distance adjustable reached 1000m, the air baud rate 5000bps).
The default idle current: 16MA (modules in different operating modes of different operating current).
Operating frequency range (433.4-473.0MHz, up to 100 communication channels) Maximum 100mW transmit power (can be set).
The default factory settings: Operating mode FU3, baud rate 9600bps, communication channel CH001 (433.4M).

Binding

Electronics

Brand

KNACRO

EAN

0713653007462

EANList

0713653007462

Label

KNACRO

Manufacturer

KNACRO

ProductGroup

Speakers

Publisher

KNACRO

Studio

KNACRO

UPC

713653007462

UPCList

713653007462