Material: Full Carbon Fiber
Diagonal length: 220mm
Net weight: 120g
Package Size: 230*10*4.5cm
Thickness: upper plate: 1.5mm
Bottom plate:2.0mm Arm plate:4mm
– Input voltage range (3S-4S LiPo operation): 9 – 18V DC
– Regulated 5V and 12V outputs
– LED power indicators ( 5V andamp; 12V outputs )
– 6 ESC outputs andamp; 1 pair VCC/GND pads
-Continuous current: 25A*4 or 15A*6
– Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
– Designed for RC Receivers, Flight controllers, OSD, and Servos.
– DC/DC synchronous buck regulator.
– Voltage: 5.0 +/- 0.1VDC
– Continuous current: 2 Amps (Max.2.5A 10s/minute)
– Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
– Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
– Designed for Video TX or FPV camera with linear regulator.
– The battery should be 4S LiPo (1318V DC)
– Voltage: 12.0 +/- 0.3VDC
– Continuous current: 500mA (Max.0.8A 5s/minute)
– Short-circuit tolerant (2 seconds/minute)
BEC 12V 3S LiPo
– Output voltage= 3S LiPo voltage -1V
– Dimensions: 36 x 50 x 4 mm (without XT60)
– Mounting: 30.5 x 30.5mm, Φ3mm
– Weight: 7.5g(without XT60), 11g(with XT60)
Tips:other accessories（like Motor,ESC,Props) do not including.
1 * 220-RX H210 FPV Racing Drone Frame Carbon Fiber Quadcopter Frame
1 * PDb- XT60
1 * XT60 Matek PDB 12V 5V BEC 36*36mm
With full carbon fiber material, perfect design to make the drone body featuring with light weight but very strong.
X-structure is much more suitable for FPV racing drone,to reach high speed, violent move, more flexible and stable.
With camera mount, perfect design for tilt angle of 25°-30°
The PDB-XT60 has been engineered to providethe highest possible performance and reliability in a 36*50mm 4 layers PCB.
It distributes power from a Lipo pack to 6 ECSc,as well as providing。 sybchronised regulated DC 5V outputs linear regulated DC 12V for powering