Driver board interfaces:
1.Power Supply(512V 2A)
7.TTL Signal 50Pin
8.LVDS Signal 12 ch 6bit 8bit
This controller board support Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V.
If you dont know how to connect the Screen,please feel free to contact us
Power Supply is NOT included
If you want to conect this screen to your Raspberry Pi,you need a AV Cable or a HDMI Cable,or if you have a HDMI TO VGA CABLE For Raspberry pi,you can use a VGA Cable to connect your Raspberry pi to this Screen.
There is a sticker on the LCD screen. Please peel off before use.
1* HDMI+VGA+2AV Controller Board VS-TY2662-V1 (Support Automatically switch to AV2)
1* 7inch 800*480 Lcd Panel AT070TN90
1* 5-button switch and adjustment panel
RGB:800*480; Aspect Ratio: 16:9 (width: height)
Brightness: 250cdm2 (Typ.)
Signal Interface: Parallel RGB (1 ch, 6-bit)
Display Mode: TN, often white display, transmissive
12V 2A DC power adapter required and sold separately