OLED display module, 0.96inch Arduino OLED Display IIC Serial OLED Module LCD Screen Module 128X64 OLED for Arduino/stm32/51

Amazon.com Price: $15.49 (as of 06/05/2020 13:09 PST- Details)

Make sure this fits by entering your model number.
SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied.

Compare

Description



HOPE DONGKER MAKES YOUR LIFE EASIER!

Specifications
Size: 0.96 inch
Control chip: SSD1306
Display area: 21.744×10.864 (mm)
Physical size: 27.3×27.8 (mm)
Interface type: 4-wire SPI, 3-wire SPI, IC interface (default 4-wire SPI interface, switchable rear resistor position with other interfaces)
Number of pins: 7
Working temperature: -40~70 degrees.
Modulus weight: 5g

Interface definition:
1> GND (power ground)
2> VCC (power supply is 3.3~5V)
3>D0 (the SPI interface is the IIC clock line when the SPI clock line IIC interface)
4> D1 (IIC data line when SPI interface is SPI data line IIC interface)
5> RES (OLED reset, OLED needs to be reset once after power-on)
6>DC (SPI data/command selection pin, used to set IIC address when IC interface
7> CS (OLED SPI chip select bottom level is valid)

Make sure this fits by entering your model number.
SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied.

Additional information

Part Number

Item Weight

Package Dimensions

Material

Batteries Included?

Batteries Required?

Shipping Weight

Date First Available

Brand