UCTRONICS ESP8266 Weather Station IoT Starter Kit for Arduino IDE with ESP8266 ESP-12E Development Board 0.96″ OLED Display and DHT11 Temperature and Humidity Sensor

$17.99 (as of July 6, 2019, 7:28 am) & FREE Shipping. Details

Name: UCTRONICS ESP8266 Weather Station IoT Starter Kit Specification: ESP8266 ESP-12E Development Board 802.11 b/g/n protocol Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA,

Category: .

Usually ships in 24 hours

Quantity

Name: UCTRONICS ESP8266 Weather Station IoT Starter Kit
Specification:
ESP8266 ESP-12E Development Board
802.11 b/g/n protocol
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLL, regulators, and power management units
+19.5dBm output power in 802.11b mode
Integrated temperature sensor
Supports antenna diversity
Power down leakage current of < 10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4 s guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)

0.96″ 128×64 pixel OLED display
Size: 0.96”
Resolution: 128X64
Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips
Driver IC: SSD1306
Communication: IIC
VCC: 3.3~5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data

DHT11 Temperature and Humidity Sensor
Digital signal output
VCC: 3.3V~5V
GND: Ground
DATA: MCU IO port
Tips: Do not reverse the VCC and GND, otherwise it will burn!

Package including:
1pcs ESP8266 ESP-12E Development Board
1pcs 0.96″ OLED display
1pcs DHT11 Temperature and Humidity Sensor
1pcs 40x10cm female-female jumpers
1pcs USB cable

Note:
For the free weather API restriction issue, we have updated the user manual online, contact us for the newer version.

The UCTRONICS ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96″ OLED display, a DHT11 Temperature and Humidity Sensor, 40x10cm female-female jumpers, a USB cable as well as a UCTRONICS user guide (link for download), the breadboard shown in the picture is not included
Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download without reset
The 0.96″ 128×64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed
DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature measurement range: 0~50°C, temperature measurement accuracy: +/-2°C
UCTRONICS ESP8266 Weather Station IoT Starter Kit gets the current and forecast weather information from an online service and displays the expected conditions on a 128X64 pixels OLED display with nice icons. The program uses a side scrolling carousel to display the date, time. In addition, it displays the information about 3-day forecast temperature and humidity through DHT11 sensor. Contact us through Buyer-Seller Messages for further help.

Binding

Electronics

Brand

UCTRONICS

ItemDimensions

79, hundredths-inches, 197, hundredths-inches, 11, Hundredths Pounds, 197, hundredths-inches

Label

UCTRONICS

Manufacturer

UCTRONICS

Model

K0061

MPN

K0061

PartNumber

K0061

ProductGroup

PC Accessory

Publisher

UCTRONICS

Studio

UCTRONICS

Related Products

Top Rated Products

  • DJI Phantom Aerial UAV Drone Quadcopter for GoPro Parent $299.00 (as of July 8, 2019, 4:46 am)
  • Cowboy Studio Lighting Kit (Black) $74.77$244.00
  • Robolink Rokit Smart (11-in-1) Starter Robot Kit for Arduino Learners with Video Tutorials $199.99 (as of July 10, 2019, 8:00 am) & FREE Shipping. Details $119.99
  • Makerfocus 2pcs ESP8266 Module ESP-12N WiFi Wireless Serial Port Internet New Version Module Base on ESP-12 $11.99 (as of July 10, 2019, 7:47 am) & FREE Shipping. Details
  • SunFounder Sidekick Basic Starter Kit w/Breadboard, Jumper wires, Color Led, Resistors, Buzzer For Arduino UNO R3 Mega2560 Mega328 Nano - Including 42 Page Instructions Book $20.99 (as of July 22, 2019, 1:19 pm) & FREE Shipping. Details
    Save 3% with this coupon. Enter code DSVFWGC5 at checkout.
    Your coupon will be applied at amazon checkout. Details
  • Sackorange Battery Holder Case Box Black Wire Leads $5.99$7.79 (as of July 20, 2019, 2:09 pm)
  • AKK TS5823L 5.8G 200MW Mini AV Transmitter RP-SMA Female for FPV Drone $9.69 (as of August 24, 2019, 9:04 pm) & FREE Shipping. Details
  • FUNKO POP! Rocks - Queen - John Deacon (Toys)

Cart