Adafruit PiTFT 2.2 HAT Mini Kit – 320×240 2.2 TFT – No Touch

Amazon.com Price: $24.61 (as of 02/11/2024 04:44 PST- Details)

Adafruit Part Number: 2315
It’s designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2×13 header (not included) instead of the included 2×20 header
Some Soldering Required: Comes as a fully assembled display PCB and an additional 2×20 GPIO header. Some light soldering is required to attach the 2×20 GPIO header to the HAT but it’s fast and easy for anyone with a soldering iron and solder.

Category:

Description

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2″ display with 320×240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely. It’s designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2×13 header (not included) instead of the included 2×20 header This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there’s 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. Comes as a fully assembled display PCB and an additional 2×20 GPIO header. Some light soldering is required to attach the 2×20 GPIO header to the HAT but it’s fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a ‘stacky’ type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.
Adafruit Part Number: 2315
It’s designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2×13 header (not included) instead of the included 2×20 header
Some Soldering Required: Comes as a fully assembled display PCB and an additional 2×20 GPIO header. Some light soldering is required to attach the 2×20 GPIO header to the HAT but it’s fast and easy for anyone with a soldering iron and solder.
Troubleshooting: There are a variety of issues that may cause the screen to not working properly including the “White Screen” issue. If you experience any issues you may contact the seller or Adafruit for support under the warranty.
Skill Level: A medium/high level of familiarity with raspberry pi is recommended for this product.

Product Binding

Product EAN

Product EANList

Product Label

Product Manufacturer

Product Model

Product MPN

Product PackageDimensions

Product PackageQuantity

Product PartNumber

Product ProductGroup

Product ProductTypeName

Product Publisher

Product Studio

Product UPC

Product UPCList

Product Brand

Product ItemDimensions