XTOC 0.2.80 XCOM 1.0.100 XCORE 0.1.55 XINTEL 0.1.45
X Suite Update: DJI Streaming, XNODE Expansion, Sentinel Motion Detection, and Enhanced Field Operations
This release delivers major improvements across XTOC, XCOM, XINTEL, XCORE, XNODE, and Sentinel. The focus is on improving field awareness, streamlining operator workflows, expanding watch capabilities, and making intelligence and communications systems work together more effectively.
XTOC — Command & Control Enhancements
DJI RTMP Video Streaming Support
Operators can now ingest live DJI video streams directly into XTOC.
New DJI Workflow
- Dedicated DJI / RTMP mode added to Video ISR
- RTMP URL generation with QR code support
- Automatic TOC IP selection
- One-click feed setup
- Direct DJI Custom RTMP compatibility
Improvements
- Simplified stream setup process
- Feed viewers now display operator-facing URLs
- Improved support for LAN, VPN, and MANET-connected deployments
ADS-B Improvements
Airplanes.live Compatibility Fix
Resolved aircraft feeds reporting zero aircraft.
New support includes:
- Standard dump1090 feeds
- readsb feeds
- tar1090 feeds
- Airplanes.live API feeds
Tactical Map Integration
Airplanes.live feeds can now automatically prepopulate:
- Latitude
- Longitude
- Radius
using the current Tactical Map Area of Operations center.
ATAK Operator Experience Refresh
The ATAK page has been redesigned into a simplified operational workflow.
New Guided Flow
- Connect ATAK Helper
- Enable Overlay
- Monitor CoT Events
Additional improvements include:
- Cleaner layout
- Improved mobile support
- Better responsiveness
- Faster operator onboarding
Digi Modes Interface Refresh
The Digi Modes section has been redesigned for faster setup and monitoring.
New Workflow
- Choose Mode
- Connect Bridge
- Monitor Traffic
Updated Modes
- APRS
- D-STAR
- JS8Call
- FLDIGI
- VarAC
Mode-specific controls remain available while reducing interface clutter.
XNODE Integration Enhancements
News Push Notifications
XTOC can now push operational news directly to connected XNODE devices.
Features include:
- Push toggle control
- Duplicate suppression
- Watch-side notification history
- Last 30 notification archive
Alert Push Notifications
New independent alert channel added.
Operators can now separately choose:
- Push News
- Push Alerts
for connected XNODE devices.
Tactical Map Sync
XTOC now sends map overlays directly to XNODE.
Supported objects:
- Team members
- Mesh nodes
- Routes
- Zones
- Phase lines
- Events
- KML overlays
- Packet locations
Objects are automatically simplified for watch-sized displays.
Map Workflow Improvements
Added new right-click map actions:
Create Zone
- Create threat zones directly from the map
- Auto-seed center location
- Radius controls
Create Route
- Start route drawing directly from clicked map locations
- Automatically seeds route origin
XCOM — Field Operations Updates
XNODE Integration Expansion
News Notifications
XCOM can now push packet and news items directly to XNODE watches.
Alert Controls
Independent push control added for alerts and notifications.
Watch Synchronization
Improved BLE reconnect handling:
- Automatic reconnection after watch reboot
- Automatic recovery after disconnects
- Improved reliability during field use
Zone and Route Quick Reports
Map users can now create:
- ZONE reports (T=7)
- ROUTE reports (T=12)
directly from the map interface.
These reports automatically seed coordinates and geometry into communications workflows.
XINTEL — Monitoring & Signal Intelligence
XCORE Watch Integration
XINTEL data now feeds directly into XCORE’s automated watch system.
Supported sources include:
- Hits
- Transcripts
- Monitoring records
- Intelligence files
This enables automated analysis without operator intervention.
XCORE — Analysis & Overwatch
Expanded Watch Pipeline
XCORE now consumes persisted XINTEL data directly.
Capabilities
- Background monitoring
- Pattern detection
- Alert generation
- Automated intelligence review
These alerts continue to feed directly into XTOC as operational packets.
XNODE Firmware — Major Capability Expansion
Manual SOS (New)
A new dedicated SOS application has been added.
Operation
The watch now sends SOS packets directly over Meshtastic.
Packet includes:
- Unit ID
- Current location
- Priority 1 status
- HELP designation
- Timestamp
Requirements
- Assigned Watch Unit ID
- Configured SOS destination
- Active Meshtastic connection
- Valid GPS position
Manual Check-In (New)
Added a dedicated Check-In application.
Operation
The watch sends CHECKIN/LOC packets directly over Meshtastic.
Packet includes:
- Unit ID
- Current location
- Timestamp
- Status
No phone, XTOC, or XCOM relay is required.
Notification Reliability Improvements
Persistent Alert History
Notifications now survive:
- Watch reboots
- Power cycles
- Disconnects
Alert history is now stored persistently rather than only in memory.
Automatic Reconnect
Connected XTOC and XCOM sessions now attempt automatic BLE reconnection when:
- The watch reboots
- Bluetooth disconnects
- Power transitions occur
Tactical Map Viewer Improvements
XNODE map rendering has been expanded.
Supported Overlays
- Team members
- Routes
- Zones
- Events
- Phase lines
- KML overlays
- Mesh nodes
Visual Enhancements
- Colored overlay badges
- Category toggles
- Simplified field rendering
- Improved readability on small displays
Sentinel Platform Updates
Camera-Based Motion Detection (New)
ESP32-CAM Sentinel devices can now generate motion alerts without requiring PIR sensors.
New Capabilities
- Camera-frame motion detection
- Configurable sensitivity
- Area threshold controls
- Consecutive-hit filtering
- Cooldown periods
- Timeout controls
Integration
Motion events automatically generate Sentinel packets and send them to XTOC.
Configuration Options
- Enable/disable detection
- Bridge URL
- Device label
- Node ID
- Location
- Sampling interval
- Sensitivity settings
Benefits
- No additional PIR hardware required
- Works with existing ESP32-CAM deployments
- Preserves RTSP, snapshots, and streaming functions
Documentation & Operator Guides
Updated documentation throughout the X Suite now includes:
- DJI RTMP setup guides
- XNODE SOS procedures
- XNODE Check-In workflows
- Sentinel motion alert deployment
- ATAK operational workflows
- Digi Modes onboarding guides
Summary
This release expands operational awareness and field capability across the entire X Suite.
Key highlights include:
- DJI RTMP video ingest
- Camera-based Sentinel motion detection
- XNODE SOS and Check-In capabilities
- Watch notification and tactical map integration
- Improved ADS-B compatibility
- Simplified ATAK and Digi Modes workflows
- Expanded automated intelligence and alerting
The result is a faster, more connected, and more field-capable X Suite while maintaining the offline-first architecture that makes the platform resilient.